mma2018@uns.ac.rs   (+381 21) 485 23 45 | (+381 21) 485 23 31

Registration and paper submission MMA 2018

Researchers and scientists from academic institutions, consultants, professionals who work in the industry and all interested in subject are invited to submit paper(s) in accordance with MMA 2018 conference topics. The official language of the Symposium is English.

Important dates

June 30th, 2018 - Deadline for abstract submission
July 10th, 2018 - Notification of abstract acceptance
August 20th, 2018 - Deadline for paper submission
September 5th, 2018 - Review results and notification of final paper acceptance
September 15th, 2018 - Conference fee payment deadline
September 20th, 2018 - Conference programme
September 28-29th, 2018 - Conference days

Call for papers

Registration and abstract submission

For uploading the short abstract please follow the procedure:
Create/Open an EasyChair account at EasyChair platform;
Upload the short abstract, as DOC or DOCX file.
Download: mma2018abstract.docx
Deadline for abstract submission June 30th, 2018

The abstract presents the short essence of the paper and should not exceed 150 words. It briefly summarises the background and aim of research, method used, results and conclusions of the paper. We also recommend using keywords in order to identify the contents of the papers.

Paper submission

For uploading the paper please follow the procedure:
Open the EasyChair account at EasyChair platform;
Upload the paper, as PDF file.
Download: mma2018paper.docx

Note: Papers should send as DOC or DOCX on following address: mma2018@uns.ac.rs.
Deadline August 20th, 2018

Papers uploaded after the deadline will not be accepted at the conference.
For any problem regarding paper submission, please send an e-mail to mma2018@uns.ac.rs.

Instructions for writing paper

No. Of pages: 4 DIN A4 pages
Margins: left: 2,5 cm; right: 2 cm; top: 2 cm; bottom: 2 cm;
Font: Times New Roman
Title: Bold 12, capitals
Abstract: Italic 10 small letters
Headings: Bold 10, capitals
Subheadings: Bold 10, small letters
Text: Regular 10
Columns: Equal column width with 0,7 cm spacing
Spacing: Single line spacing
Formulae: Centered and numerated from 1 in ascending order. Equations must be typed in Equation Editor, with following settings:
Style -> Math
Size -> Full 12pt, Subscript/Superscript 7pt, Symbol 18pt
Figures: High quality, numerated from 1 in ascending order (e.g. Fig 1., Fig. 2. etc.); Figures and tables can spread over both two columns, please avoid photographs and color prints,
Tables: Numerated from 1 in ascending order (e.g. Table 1, Table 2, etc.)
References: Numerated from [1] in ascending order; cited papers should be marked by number from the reference list (e.g. [1], [2, 3] ...)

Sample paper: mma2018_Sample

Conference participations fee

The conference fees are:
Standard conference fee for authors - 100 EUR (included VAT of 20%)
It includes: publication of one paper in Conference Proceedings, conference materials, refreshment and coffee during the breaks and the Conference dinner.
For other participants - 50 EUR (included VAT of 20%)
It includes: conference materials, refreshment and coffee during the breaks and the Conference dinner.


FEE PAYMENT

Important: Payment of the Conference Fee can be made by bank transfer, but You can also ask for the invoice before transfer the payment.
• Conference fee for authors - 100 EUR
• Co-author / accompanying person fee – 50 EUR

All bank charges must be paid by the sender.
Please indicate clearly the ID number of the paper in the concept of the bank payment.

Beneficiary's name:

University of Novi Sad - Faculty of Technical Sciences
Trg Dositeja Obradovica 6
Novi Sad, Serbia

Account No:

840-65790-56

IBAN:

RS 35840000000006579056

Account with bank:

NATIONAL BANK OF SERBIA (NBS)
NEMANJINA 17, BELGRADE
(SWIFT: NBSRRSBGXXX)

Intermediary:

DEUTSCHE BANK AG
TAUNUSANLAGE 12, FRANKFURT/M, GERMANY
(SWIFT: DEUTDEFFXXX)

Purpose / details of payment:

MMA 2018 - Conference fee for paper No. XXX


After making the transfer, please confirm the participation by sending a copy of the bank document, no later than September 15th 2018, by e-mail: mma2018@uns.ac.rs
Download: blanko IF-MMA 2018.doc

On demand Faculty of Technical Sciences can send Invoice to authors. In that case please send name, adrress of institutions and VAT number.
For the information about the payment, please send e-mail to mma2018@uns.ac.rs

Conference participation fee - participants from Serbia who pay in RSD currency

The conference fees are:
Standard conference fee for authors - 10.000,00 RSD + VAT (PDV) 20%
It includes: publication of one paper in Conference Proceedings, conference materials, refreshment and coffee during the breaks and the Conference dinner.
For other participants – 5.000,00 RSD + VAT (PDV) 20%
It includes: conference materials, refreshment and coffee during the breaks and the Conference dinner.

Naziv institucije:

Univerzitet u Novom Sadu – Fakultet tehničkih nauka
Trg Dositeja Obradovica 6
Novi Sad, Srbija

Broj žiro računa:

840-1710666-12

IBAN:

RS 35840000000006579056

Banka:

Ministartsvo finansija
Uprava za trezor, filijala Novi Sad
(SWIFT: NBSRRSBGXXX)

Namena/detalji plaćanja:

MMA 2018 – Kotizacija za rad No. XXX


Download: Blanko Profaktura-MMA 2018.doc
For the information about the payment, please send e-mail to mma2018@uns.ac.rs

Conference Proceedings and Journal Publications

All accepted papers will be published in the Conference Proceedings, and the selected papers will be published in the following journals:
„Journal of Production Engineering“,
„Journal for Technology of Plasticity“,
„Machine Design“.

List of accepted papers

AUTHORS

PAPER TITLE

 
 

SERGII KLIMENKO, MARINA KOPEYKINA, ANDREI MANOKHIN, YRII MEL’NIYCHUK, ARTEM NAYDENKO AND LJUBODRAG TANOVIC

ENHANCED PCBN TOOLS FOR HARD MACHINING

 

ADNAN MUSTAFIC, SLADJAN LOVRIC, EDIS NASIC, JASMIN HALILOVIC, DENIS BECIROVIC AND MIDHAT OSMIC

TAGUCHI-BASED GREY RELATIONAL ANALYSIS OF PERFORMANCE CHARACTERISTICS IN THE MQL TURNING PROCESS OF X5CRNI18-10 STEEL

 

MIROSLAV TRAJANOVIC AND MILICA TUFEGDZIC

TRENDS IN PRODUCING PERSONALIZED BONE IMPLANTS USING ADDITIVE MANUFACTURING

 

SVETOMIR SIMONOVIĆ

ON OPTIMIZATION OF ATOMIC FORCE MICROSCOPE CANTILEVER DESIGN WITH RESPECT TO ITS MECHANICAL REQUIREMENTS

 

LIVIJA CVETICANIN, MIODRAG ZUKOVIC AND ZVONKO RAKARIC

VIBRATION PROPERTIES OF MASS-IN-MASS UNITS OF THE ELASTIC METAMATERIAL

 

STEFAN MITROVIC, ZIVANA JAKOVLJEVIC AND ZORAN DIMIC

DISTRIBUTED CONTROL OF MANUFACTURING RESOURCES – SECURITY RELATED ISSUES

 

RÓBERTNÉ KOVÁCS, GÁBOR KESZTHELYI-SZABÓ AND PÉTER SZENDRŐ

ENHANCING BIOGAS PRODUCTION KINETIC OF WASTEWATER BY MICROWAVE PRE-TREATMENT

 

CVETANKA VELKOSKA, MIKOLAJ KUZINOVSKI AND MITE TOMOV

A REVIEW OF THE QUALITY COST STRUCTURE DEFINITION MODELS – THEORETICAL APPROACH

 

CVETANKA VELKOSKA, MITE TOMOV AND MIKOLAJ KUZINOVSKI

THEORETICAL ASPECTS RELATED TO THE CREATION OF ALGORITHM FOR QUALITY COST MEASUREMENT SYSTEM

 

MILICA PETROVIĆ, ALEKSANDAR JOKIĆ AND ZORAN MILJKOVIĆ

SINGLE MOBILE ROBOT SCHEDULING: A MATHEMATICAL MODELING OF THE PROBLEM WITH REAL-WORLD IMPLEMENTATION

 

IVAN KNEZEVIC, SAVO BOJIC, DEJAN LUKIC, MILAN RACKOV, MAJA CAVIC, MARKO PENCIC AND SABOLC CAKO

APPLICATION OF 3D PRINTED FIXTURES FOR WELDING

 

BRANKO KOKOTOVICAND NIKOLA VORKAPIC

OPTIMIZATION OF THREADING STRATEGIES FOR TURNING OF LARGE THREAD PROFILES

 

NIKOLA VORKAPIC AND BRANKO KOKOTOVIC

SYNTHESIS AND ANALYSIS OF THE TOOL DYNAMOMETER FOR TURNING OPERATIONS

 

ELEONORA DESNICA, MIROSLAV VULIĆ, ALEKSANDAR PAVLOVIĆ AND MILAN NIKOLIĆ

ELV MANAGING THROUGH ANALYSIS OF RESOURCE CAPACITIES OF THE SERBIA: EQUIPMENT, HUMAN RESOURCE AND FINANCIAL SUPPORT

 

MILAN PECANAC, MIROSLAV DRAMICANIN, PETAR JANJATOVIC, MIRJANA RISTIC, DRAGAN RAJNOVIC, LEPOSAVA SIDJANIN AND SEBASTIAN BALOS

INFLUENCE OF TOOL GEOMETRY ON FRICTION STIR WELDED JOINTS

 

VELIBOR KARANOVIĆ, SLAĐAN ANDRIĆ, MITAR JOCANOVIĆ, MARKO OROŠNJAK AND UGLJEŠA BUGARIĆ

INFLUENCE OF TOOL GEOMETRY ON FRICTION STIR WELDED JOINTS

 

ACO ANTIC, MILAN ZELJKOVIC, LIDIJA KRSTANOVIC AND NIKOLAE UNGUREANU

A TEXTURE-BASED DESCRIPTORS FOR REAL TIME TOOL CONDITION MONITORING

 

STJEPAN FLEGARIĆ, DORIAN MARJANOVIĆ, MARIO ŠTORGA AND NENAD BOJČETIĆ

SMART SHEET METAL FORMING TOOLS DESIGN

 

SAŠA ŽIVANOVIĆ AND NIKOLA SLAVKOVIC

APPLICATION OF THE STEP-NC STANDARD ISO 10303 AP238 FOR TURNING OPERATIONS

 

JOVAN VUKMAN, DEJAN LUKIĆ, STEVO BOROJEVIĆ, MIJODRAG MILOŠEVIĆ AND DAVORIN KRAMAR

EXPERIMENTAL RESEARCH OF THE INFLUENCE OF HIGH-SPEED MACHINING PARAMETERS ON TIME AND SURFACE ROUGHNESS OF THIN-WALLED PARTS

 

 

BLAŽ KARPE, ŽAN FERČAK, ALEŠ NAGODE, BOŠTJAN BAVEC, STJEPAN KOŽUH, MIRKO GOJIĆ, SAMO SMOLEJ, MIRKO SOKOVIĆ, MILAN BIZJAK AND BORUT KOSEC

THERMAL CHARACTERISTICS OF ENAMELS AND ENAMELLED METAL SHEETS

 

BORUT KOSEC, BALAŽ KERPE, MATEJA VODLAN, IGOR KOPAČ, IGOR BUDAK, ALENKA PAVLIČ, TATJANA PUŠKAR, KATJA ZUPANČIĆ, BRINA FIR, MIRKO GOJIĆ AND ALEŠ NAGODE

THERMAL PROPERTIES OF TITANIUM ALLOYS USED IN DENTAL MEDICINE

 

MLADOMIR MILUTINOVIC, DEJAN MOVRIN, PLAVKA SKAKUN, SASA RANDJELOVIC, DRAGIŠA VILOTIĆ AND LJILJANA STREFANOVIĆ

SOME REMARKS ON PROCESS OFCOMBINED FORWARD - BACKWARD EXTRUSION OF STEE

 

MILENKO SEKULIĆ, MARIN GOSTIMIROVIĆ, NENAD KULUNDŽIĆ AND ANĐELKO ALEKSIĆ

TECHNOLOGICAL CHANGES IN MOLD MAKING INDUSTRY

 

VESNA RASPUDIC AND ZELJKO MIKULIC

OPTIMUM DESIGN OF I-SHAPED CROSS-SECTION USING NONLINEAR PROGRAMMING

 

ALMA ŽIGA, ĐERZIJA BEGIĆ-HAJDAREVIĆ AND ZLATAN COGO

MECHANICAL TOYS AND SOUVENIRS OBTAINED BY CO2 LASER CUTTING OF PLYWOOD

 

MARIN GOSTIMIROVIC, VLADIMIR PUCOVSKY, DRAGAN RODIC, MILENKO SEKULIC AND PAVEL KOVAC

A NEURAL NETWORK MODEL FOR PREDICTING JET TRAJECTORY IN THE ABRASIVE WATER JET MACHINING

 

LAZAR KOVAČEVIĆ, PAL TEREK, ALEKSANDAR MILETIĆ, DRAGAN KUKURUZOVIĆ AND BRANKO ŠKORIĆ

OPTIMIZING COMPUTATIONAL GRID DENSITY FOR CASTING SIMULATION

 

BRANKO STRBAC, SONJA BISEVAC, MILAN DELIC, BOJAN ACKO AND MIODRAG HADZISTEVIC

COMPETENCE ASSESSMENT OF CMM FOR DIFFERENT MEASURING TASKS

 

DANIJEL ŠOGOROVIĆ AND ISABELLA VRAČEVIĆ

TESTING OF THE ROUGHNESS PARAMETERS IN THE TURNING PROCESS OF ALUMINUM PARTS

 

DRAGAN RODIC, MARIN GOSTIMIROVIC, PAVEL KOVAČ, MILENKO SEKULIC AND BORISLAV SAVKOVIĆ

PRINCIPLE OF ELECTRICAL DISCHARGE MACHINING OF NON-CONDUCTIVE ZIRCONIA CERAMICS

 

CVIJETIN MLAĐENOVIĆ, ALEKSANDAR KOŠARAC, MILAN ZELJKOVIĆ AND MILOŠ KNEŽEV

EXPERIMENTAL AND ANALYTICAL INVESTIGATION OF SELF-EXCITED VIBRATIONS IN MILLING

 

DRAGAN ZIVANIC, ANTO GAJIĆ, ATILA ZELIĆ AND NIKOLA ILANKOVIĆ

FLAT BELT FEEDER REGULATION POSSIBILITIES

 

SANTOŠI ŽELJKO, ŠOKAC MARIO, BRANKO TADIĆ, BUDAK IGOR, GORAN SIMUNOVIĆ, MILANA ILIĆ-MIĆUNOVIĆ AND ĐORĐE VUKELIĆ

EVALUATION OF KINETIC FRICTION COEFFICIENT FOR WOODEN SPECIMENS

 

MIĆA ĐURĐEV, MIJODRAG MILOŠEVIĆ, DEJAN LUKIĆ, , ELEONORA DESNICA, VELIMIR TODIĆ AND IVAN KURIC

A SIMPLE PARTICLE SWARM OPTIMIZATION FOR PROCESS PLANNING PROBLEM

 

VESNA KECIC, MILJANA PRICA, ĐURĐA KERKEZ, MILENA BEČELIĆ-TOMIN, ALEKSANDRA KULIĆ, ANITA LEOVAC MAĆERAK AND BOŽO DALMACIJA

APPLICATION OF A DEFINITIVE SCREENING DESIGN TO MAGENTA DYE DEGRADATION BY HOMOGENEOUS FENTON PROCESS

 

MIRJANA RISTIC, DRAGAN RAJNOVIC, MARIO MACAS, MILAN PECANAC, SEBASTIAN BALOS AND LEPOSAVA SIDJANIN

THE STUDY OF THE CONTAMINATED SURFACE LAYER OF HIP TREATED SUPERALLOY IN100

 

LUCIJANO BERUS, MIRKO FICKO, SIMON KLANČNIK AND JANEZ GOTLIH

DEVELOPMENT OF A SYSTEM FOR MONITORING TEMPERATURE DISTRIBUTION AND OPERATING OF HEAT SOURCES INSIDE HEATING DEVICE

 

BORIS CRNOKIĆ AND MIROSLAV GRUBIŠIĆ

FUSION OF INFRARED SENSORS AND CAMERA FOR MOBILE ROBOT NAVIGATION SYSTEM - SIMULATION SCENARIO

 

MILOŠ RISTIĆMIODRAG MANIC AND MILOS KOSANOVIC

PARAMETRICALLY DESIGNED PRODUCT MANUFACTURABILITY ANALYSIS USING KNOWLEDGE BASED SYSTEM

 

DRAGAN KUKURUZOVIĆ, PAL TEREK, LAZAR KOVAČEVIĆ, BRANKO SKORIC, SEBASTIAN BALOŠ, MIHA ČEKADA AND ALEKSANDAR MILETIC

 

ESTIMATION OF SOLDERING TENDENCY OF AL-ALLOY TOWARD CRALN AS A CANDIDATE COATING FOR HPDC TOOLS

 

SIMO JOKANOVICVLASTIMIR PEJIĆ AND, STEVO BOROJEVIĆ

STEP MODEL OF MACHINING FEATURES OF SWEEP TYPE

 

MILANA ILIĆ MIĆUNOVIĆ, BORIS AGARSKI, MIODRAG HADŽISTEVIĆ, BORUT KOSEC AND ĐORĐE VUKELIĆ

COMPARABILITY OF LIFE CYCLE ASSESSMENT RESULTS IN TYPE III ENVIRONMENTAL DECLARATIONS

 

MIRJANA BOJANIĆ ŠEJAT, VELIMIR TODIĆ, CVIJETIN MLAĐENOVIĆ, LIVIA DANA BEJU AND JOVA GRUJIĆ

TECHNOLOGICAL PREPARATION OF THE ENDOPROSTHESIS PRODUCTION

 

ALEKSANDAR MILETIC, PETER PANJAN, MIHA ČEKADA, LAZAR KOVAČEVIĆ, PAL TEREK AND BRANKO ŠKORIĆ

MECHANICAL AND TRIBOLOGICAL PROPERTIES OF INDUSTRIALLY PREPARED TIALN HARD CERAMIC COATINGS

 

OSTOJA MILETIĆ AND MLADEN TODIĆ

ANALYTICAL-EXPERIMENTAL DETERMINATION OF REINFORCEMENT AT PROFILIZATION OF THE UGAONICS

 

ZORANA LANC, MILAN ZELJKOVIĆ, MIODRAG HADZISTEVIC, BRANKO STRBAC AND ALEKSANDAR ZIVKOVIC

DETERMINATION OF EMISSIVITY OF STEEL ALLOY USING INFRARED THERMOGRAPHIC TECHNIQUE

 

PETAR PETROVIĆ, LAZAR MATIJAŠEVIĆ AND MILOŠ MILIVOJEVIĆ

UNDERACTUATED HANDS IN SMALL-BATCH ROBOTIC ASSEMBLY

 

GORAN JOTIĆ, STEVO BOROJEVIĆ, MIODRAG HADŽISTEVIĆ, BRANKO ŠTRBAC AND JOVAN VUKMAN

ANALYSIS OF COMPARATIVE MEASUREMENT RESULTS FOR THIN-WALLED AL 7075 ALUMINIUM ALLOY STRUCTURES

 

STEVO BOROJEVIĆ, VID JOVIŠEVIĆ, ĐORĐE ČIČA AND BRANISLAV SREDANOVIĆ

MODELING AND SIMULATION OF PRODUCTION PROCESSES FOR THE TOOLS OF PRESS BRAKE

 

BOŽO ILIĆ AND BRANKO SAVIĆ

MANUFACTURE OF HEAT AND ELECTRIC ENERGY BY CONSTRUCTION OF MUNICIPAL SOLVENT AND AGRICULTURAL WASTE

 

DJORDJE CICA, STEVO BOROJEVIC, BRANISLAV SREDANOVIC AND SASA TESIC

ARTIFICIAL NEURAL NETWORKS MODEL FOR THE PREDICTION OF SURFACE ROUGH-NESS IN MACHINING THIN WALLED PARTS

 

LUKA CERCE, DAVORIN KRAMAR AND STEVO BOROJEVIC

OPTIMIZATION OF THE PROCESS PARAMETERS FOR STABILIZATION AND IMPROVEMENT OF THE TURNING PROCESS CAPABILITY

 

EDIN CERJAKOVIC, ALAN TOPCIC, SLADAN LOVRIC AND MUHAMED HERIC

DESIGN AND STARTING UP OF AUTOMATED ASSEMBLY LINES IN THE AUTOMOTIVE INDUSTRY

 

SLOBODAN KRNJETIN AND SLOBODAN ŠUPIĆ

CONSTRUCTION WITH BALED STRAW - FIRE SAFETY

 

IVAN MATIN, DJORDJE VUKELIC, MIODRAG HADZISTEVIC, BRANKO SRTBAC, ZELJKO SANTOSI AND DEJAN LUKIC

AN INTEGRATED DESIGN APPROACH FOR PLASTIC PART DEVELOPMENT

 

SASA RANDJELOVIC AND MLADOMIR MILUTINOVIC

FEM ANALYSIS OF DIE PLATE AT PIERCING AND BLANKING TOOL

 

ELVIS HOZDIC

CYBERNETIZATION OF MANUFACTURING SYSTEMS

 

DUSAN SORMAZ

DISTRIBUTED PROCESS PLANNING FOR DIGITAL MANUFACTURING AND INDUSTRY 4.0

 

SERGEY DOBROTVORSKIY, LUDMILA DOBROVOLSKA AND B. A. ALEKSENKO

 

THE USE OF INTERNAL DISSECTORS IN THE PROCESS OF REGENERATION OF ADSORBENTS BY MEANS OF THE MICROWAVE ENERGY

 

 

MILOŠ MADIĆ, PREDRAG JANKOVIĆ, MIROSLAV RADOVANOVIĆ, SRĐAN MLADENOVIĆ AND DUŠAN PETKOVIĆ

ANALYSIS OF VARIABLE COSTS IN CO2 LASER CUTTING OF MILD STEEL

 

IONUŢ GHIONEA, CONSTANTIN OPRAN, SASA CUKOVIC AND MIHAELA PLEŞA

IMPROVEMENTS AND MATERIALS FOR PRODUCTION OF A MAGNETIC DRIVE MICROPUMP: AN OVERVIEW AND RECOMMENDATIONS

 

MIODRAG ZIGIC AND NENAD GRAHOVAC

ESTIMATION FOR ORIENTATION OF HUMAN BODY PARTS USING DATA FROM IMU SENSORS

 

VLADIMIR BLANUŠA, BRANKO MILISAVLJEVIĆ, MILAN ZELJKOVIĆ, ALEKSANDAR ŽIVKOVIĆ, BRANKO SAVIĆ AND SANDRA NIKIĆ-SOVILJ

ANALYSIS OF LOAD DISTRIBUTION IN DOUBLE-ROW CYLINDRICAL ROLLER BEARING FOR MACHINE TOOLS MAIN SPINDLE ASSEMBLY

 

NENAD JANJIĆ, BRANKO SAVIĆ, DANILO MIKIĆ, NENAD STANKOVIĆ AND DRAGAN PETROVIĆ

APPLICATION OF MODEL OF RELIABILITY ON MACHINE SYSTEMS BASED ON LOGNORMAL STATISTICAL DISTRIBUTION

 

MOJCA RADMAN, MILOŠ JOVANOVIĆ, MIRO URAN AND LJUBIŠA TRIVKOVIĆ

TRAINING FOR INTERNATIONAL WELDING COORDINATORS

 

ZDRAVKO BIJELIĆ, BILJANA MILANOVIĆ AND DRAGAN MILETIĆ

DEVELOPMENT OF MATHEMATICAL MODEL FOR OPTIMAL MANAGEMENT OF TECHNOLOGICAL DEVELOPMENT CHANGES

 

ANGELA FAJSI, SLOBODAN MORACA, NELA CVETKOVIC, ALEKSANDAR VEKIC AND MARKO LJUBIČIĆ

CLUSTER-BASED PRODUCTION CONCEPT

 

DARKO PETKOVIC AND AJDIN JELEC

CONCEPTUAL SOLUTION FOR FLEXIBILITY IMPROVEMENT OF PROCESSING SYSTEM IN WOOD PROCESSING SECTOR

 

JOVICA ILIC, MILIJA KRAISNIK, GORAN JOTIC AND JELICA ANIC

ABRICATION OF AUTHENTIC FUNCTIONAL PARTS FOR OLDTIMER USING INTEGRATION OF REVERSE ENGEENERING AND 3D PRINTING

 

DJORDJIC, D., DJURIC, S., HADZISTEVIC, M.

ANALYSIS OF FLOWS AND MANAGEMENT OF HAZARDOUS WASTE IN COMPLEX SYSTEMS

 

MIRCHESKI, I.

DETERMINATION OF DISASSEMBLY INTERFERENCE MATRIX AND IMPROVED NONDESTRUCTIVE DISASSEMBLY SEQUENCES FOR THE PRODUCT

 

SLOBODAN MORACA, NELA CVETKOVIC, ANGELA FAJSI, DANIJELA GRACANIN AND NIKOLA SUZIC

SCHEDULING IN PROJECT-BASED MANUFACTURING ENVIRONMENT

 

ALEKSANDAR CABRILO, KATARINA GERIC

CHARPY IMPACT PROPERTIES OF A CRACK IN WELD METAL, HAZ AND BASE METAL OF WELDED ARMOR STEEL

 

SOVILJ, B., SOVILJ-NIKIĆ, S.

TRIBOLOGICAL RESEARCHES OF GEAR CUTTING PROCESSES OF CYLINDRICAL GEARS

 

BOJANA RISTOVSKA, ELENA PAPAZOSKA AND VALENTINA GECEVSKA

IMPROVING MANUFACTURING PROCESS BY OPTIMIZING TIME PARAMETERS

 

BOJANA TRAJANOSKA, VIKTOR GAVRILOSKI AND ELISAVETA DONCHEVA

DEVELOPING AND TESTING HYBRID GLASS TO STEEL STRUCTURAL ELEMENTS – FLEXIBLE DESIGN APPROACH

 

ALEKSANDAR AŠONJA AND DANILO MIKIĆ

FACILITIES WITH RES ON PUBLIC BUILDINGS IN THE CITY OF NOVI SAD

 

TIANA SKENDEROVSKA, VALENTINA GECEVSKA AND RADMIL POLENAKOVIK

INCREASING PRODUCTION CAPACITIES THROUGH THE DEVELOPMENT AND INTEGRATION OF THE 5 STAGE PROJECT MANAGEMENT METHODOLOGY

 

TATJANA PUŠKAR, IGOR BUDAK, DIMITAR JAKIMOV, DANIELA DJUROVIĆ KOPRIVICA, VESNA KOJIĆ AND MILIANA ILIĆ MIĆUNOVIĆ

TESTING BIOCOMPATIBILITY OF BONE SUBSTITUTE BY FLUORESCENT MICROSCOPY

 

MILOS KNEZEV, SLOBODAN TABAKOVIC, MILAN ZELJKOVIC, BRANKO STRBAC AND CVIJETIN MLAĐENOVIĆ

ANALYSIS AND VERIFICATION OF COMPLEX SURFACESS MACHINING BY THREE AXIS MILLING MACHINE CENTER

 

NIKOLA PALIC, VARUN SHARMA, FATIMA ZIVIC, SLOBODAN MITROVIC AND NENAD GRUJOVIC

TRIBOLOGY STUDY OF ALUMINUM-BASED FOAM

 

JOVAN SEKULIC, JOVAN GRUJIĆ, DUŠAN MARIĆ, MILAN ZELJKOVIĆ, SLOBODAN TABAKOVIC AND SEBASTIAN BALOŠ

TESTING BIOCOMPATIBILITY OF MATERIAL FOR IMPLANTS

 

VIDOSAV MAJSTOROVIC, SLAVENKO STOJADINOVIC AND NUMAN DURAKBASA

AN IN - PROCESS MEASUREMENT INSPECTION PLANNING MODEL FOR PRISMATIC PARTS

 

LIHUI WANG

COMBINING DIGITAL TWIN AND PROGNOSIS IN FACTORIES OF THE FUTURE

 

MANIC, M., VITKOVIC, N., STOJKOVIC, M., MISIC, D., TRAJANOVIC, M.

DESIGN OF CUSTOMIZED ANATOMICALLY ADJUSTED IMPLANTS

 

SORMAZ, D., GOUVEIA, R., SARKAR, A.

RULE BASED PROCESS SELECTION OF MILLING PROCESSES BASED ON GD&T REQUIREMENTS