Conference Program MMA 2024

• Rodić, D., Gostimirović, M., Sekulić, M., Savković, B., Aleksić, A., Kosanović, A.
  CIRCULARITY ANALYSIS OF LASER-DRILLED HOLES USING THE TAGUCHI METHOD
• Madić, M., Trifunović, M., Janković, P.
  DEVELOPMENT AND ANALYSIS OF ANN MODEL FOR TOOL LIFE PREDICTION IN DRY TURNING OF S355JR UNALLOYED STEEL
• Baralić, J., Nedić, B., Jovičić, A.
  MULTILAYER CUTTING WITH ABRASIVE WATER JET
• Kovac, P., Taric, M., Rodic, D., Savkovic, B., Dudic, B., Jesic, D.
  NEURO-FUZZY SYSTEMS MODELING OF HARD STEEL SURFACE ROUGHNESS PARAMETERS
• Vorkapic, N., Kokotovic, B., Zivanovic, S.
  COMPARATIVE ANALYSIS OF STATISTICAL FEATURES OF SIGNALS IN THE TIME DOMAIN IN INTERNAL TURNING OPERATIONS
• Aleksić, A., Rodić, D., Gostimirović, M., Sekulić, M., Savković, B., Kosanović, A.
  RELIMINARY INVESTIGATION OF THE IMPACT OF MQL ON SURFACE ROUGHNESS DURING THE TURNING ALUMINUM ALLOY 6082
• Savkovic, B., Rodic, D., Sekulic, M., Kovac, P., Aleksic, A., Kosanovic, A.
  DEVELOPMENT OF A MEASUREMENT-ACQUISITION SYSTEM FOR MEASURING CUTTING FORCES AND TEMPERATURES USING VIRTUAL INSTRUMENTATION

Activity: Papers presentation

Day: September 25, 2024 (Wednesday)
Place: Meeting room 1 (Ground floor);
Science and Technology park, Fruškogorska 1, Novi Sad
Time: 11:00÷12:15

Section B1: Machine Tools and Automatic Flexible Technological Systems, CAx and CIM Procedures and Systems

• Karabegović, I., Husak, E., Mahmić, M., Karabegović, E.
  CHINA IS THE LEADING COUNTRY IN THE WORLD DEVELOPING AND IMPLEMENTING ROBOT TECHNOLOGY IN ALL INDUSTRY BRANCHES
• Marinković, D., Živković, A., Mlađenović, C., Knežev, M., Mejić, L., Savković, B.
  ANALYSIS OF THE INFLUENCE OF THE CUTTING REGIMES ON THE QUALITY OF THE MACHINING SURFACE IN TURNING PROCESS
• Devic, A., Vidakovic, J., Zivkovic, N., Stepanovic, A.
  ADVANCEMENT OF THE INDUSTRIAL ROBOT PROGRAMMING LANGUAGE L-IRL USING AUGMENTED REALITY
• Matin, I., Strbac, B., Ranisavljev, M., Hadzistevic, M., Vukelic, D.
  RESEARCH OF THE DEVIATION BETWEEN NUMERICAL SIMULATION AND EXPERIMENTS IN PLASTIC INJECTION MOLDING
• Anišić, Z., Peić Tukuljac, E.
  DEVELOPMENT OF AN ELECTRONIC TOOL (ESAL – ELECTRONIC SHAFT ADJUSTER AND LOCKER) FOR DIRECT INJECTION PUMPS
• Devedzic, G., Kocovic, V., Djordjevic, A., Jovanovic Pesic, Z., Dzunic, D., Vukelic, D., Petrovic Savic, S.
  RECONSTRUCTION AND OPTIMIZATION OF COMPLEX GEOMETRIC PARTS THROUGH REVERSE ENGINEERING
• Živković, N., Pavlović, D., Ponjavić, M., Krošnjar, A., Stepanović, A.
  DESIGN OF COOLING SYSTEM FOR TWO POWER TRANSISTOR MODULES
• Šulc, J., Reljić, V., Dakić, N., Jurošević, V.
  INTEGRATION OF ONE PNEUMATIC SOLUTION WITH A CNC DEVICE FOR THE REALIZATION OF THE PERFORATION PROCESS

Activity: Papers presentation

Day: September 25, 2024 (Wednesday)
Place: Meeting room 2 (1st floor);
Science and Technology park, Fruškogorska 1, Novi Sad
Time: 11:00÷12:15

Section C: Metrology, Quality, Fixtures, Cutting Tools and Tribology

• Tanasić, Z., Vuković, M., Panić, M., Janjić, G.
  IMPROVEMENT ASSEMBLY PROCESS USING LEAN MANUFACTURING METHODS AND TOOLS
• Milosevic, A., Kocovic, V., Santosi, Z., Sokac, M., Simunovic, G., Tadic, B., Vukelic, D.
  MODELLING THE BORING PROCESS ON THE BASIS OF CENTRIFUGAL FORCE USING A SPECIALLY DESIGNED TOOL HOLDER
• Vidakovic I., Simunovic, K., Pacarek, G., Barac, Z., Rozing, G.
  APPLICATION OF NiCrBSi AND NiCrBSi-WC COATINGS AS WEAR PROTECTION FOR PARTS OF AGRICULTURAL TECHNIQUE
• Jotic, G., Strbac, B., Sokac, M., Tanasic, Z., Runje, B., Acko, B., Hadzistevic, M.
  OPTIMIZATION OF THE MEASUREMENT PROCESS USING A 3D LASER SCANNER
• Ognjenčić, K., Šimunović, G.
  MEASUREMENT TECHNIQUES FOR REDUCING WATER LOSS IN SUPPLY SYSTEMS: FLOW, PRESSURE, AND NOISE ASSESSMENT
• Bozic, D., Runje, B., Razumic, A., Lisjak, D., Strbac, B.
  RISK ASSESSMENT FOR NON-CENTERED MODELS IN METROLOGY
• Rodinger, T., Lukšić, H., Ćorić, D., Rede, V.
  THE INFLUENCE OF ARTIFICIAL AGING PARAMETERS ON THE ABRASIVE WEAR RESISTANCE OF AN Al-Zn-Mg ALLOY
• Kasalica, V., Zivanovic, S., Stojadinovic, S.
  SIMULATION OF MEASUREMENT ON CMM BY IMPLEMENTING A DIGITAL TWIN MODEL
• Santosi, Z., Sokac, M., Milosevic, A., Ivanov, V., Vukelic, D.
  3D RECONSTRUCTION OF MACHINE VISE BY APPLICATION OF PHOTOGRAMMETRY AND REVERSE ENGINEERING
• Bozic, D., Runje, B., Razumic, A., Lisjak, D., Strbac, B.
  RISK ASSESSMENT FOR LINEAR REGRESSION MODELS IN METROLOGY: HYPOTHETICAL CASES

Activity: Papers presentation

Day: September 25, 2024 (Wednesday)
Place: Conference room (Ground floor);
Science and Technology park, Fruškogorska 1, Novi Sad
Time: 12:30÷13:45

Section D: Process Planning, Optimization, Logistics and Internet Technologies in Production Engineering

• Makovec, I.
  GENERATIVE ARTIFICIAL INTELLIGENCE IN COLLABORATIVE MANUFACTURING
• Bozic, D., Lukic, D., Milosevic, M., Spaic, O., Marinovic, B., Radovanovic, M.
  OPTIMIZATION OF MACHINING PROCESS PLANNING – CASE STUDY OF A PRISMATIC PART
• Trstenjak, M., Opetuk, T., Cajner, H., Đukić, G., Mustapić, M.
  METHODS AND TOOLS FOR ERGONOMIC ASSESSMENT IN MODERN INDUSTRIAL ENVIRONMENT
• Vukelic, Z., Cajner, H., Trstenjak, M.
  THE ASPECT OF TECHNOLOGICAL HUMANISM IN THE IMPLEMENTATION OF ROBOTIC SYSTEMS (RS) AND ARTIFICIAL INTELLIGENCE (AI) IN INDUSTRY 5.0
• Štrbac, G., Štrbac, B., Milošević, M., Ranisavljev, M., Hadžistević, M.
  IMPORTANCE OF 3D CAD SEARCH ENGINES IN GEAR MAINTENANCE
• Vukman, J., Milošević, M., Borojević, S., Ungureanu, N., Božić, D., Lukić, D.
  OPTIMIZATION OF THE MACHINING PARAMETERS OF ALUMINUM PARTS AS A FUNCTION OF THE PERPENDICULARITY DEVIATION OF THIN-WALLED SURFACES
• Ćurčić, S., Milovančević, M., Savković, B.
  IMPROVING THE SAFETY OF THE TRANSPORT ZONE USING THE MAKIGAMI METHODOLOGY

Activity: Papers presentation

Day: September 25, 2024 (Wednesday)
Place: Meeting room 1 (Ground floor);
Science and Technology park, Fruškogorska 1, Novi Sad
Time: 12:30÷13:45

Section B2: Machine Tools and Automatic Flexible Technological Systems, CAx and CIM Procedures and Systems

• Budimir Buda, A., Tabaković, S., Zeljković, M., Živanović, S., Dimić, Z.
  STRAIGHTNESS ANALYSIS OF MACHINE TOOL WITH NON-LINEAR KINEMATICS
• Tabaković, S., Zeljković, M., Živanović, S.
  METHODS OF MONITORING AND APPLYING ENERGY BALANCE PARAMETERS IN THE EXPLOITATION OF MODERN MACHINE TOOLS
• Jokić, A., Jevtić, Đ., Brenjo, K., Petrović, M., Miljković, Z.
  DEEP LEARNING-BASED VISUAL SERVOING ALGORITHM FOR WHEELED MOBILE ROBOT CONTROL
• Knežev, M., Mlađenović, C., Marinković, D., Calin, A., Živković, A.
  FINITE ELEMENT ANALYSIS OF TURNING CUTTING TOOL
• Nešovanović, Lj., Živanović, S., Konjević, P.
  INACCURACY ANALYSIS OF CHEBYSHEV’S MECHANISM
• Suvajac, Z., Nedeljkovic, D., Jakovljevic, Z.
  OBJECT POSITION AND ORIENTATION DETECTION IN ASSEMBLY TASKS – AN APPROACH BASED ON YOLOV8 ALGORITHM
• Maletić, J., Vorkapic, N., Živanović, S.
  PROGRAMMING AND VERIFICATION OF THE MACHINING PROGRAM FOR A TEST WORKPIECE FOR A MACHINE WITH A HORIZONTAL ROTARY AXIS

Activity: Papers presentation

Day: September 25, 2024 (Wednesday)
Place: Meeting room 2 (1st floor);
Science and Technology park, Fruškogorska 1, Novi Sad
Time: 12:30÷13:45

Section E1: Materials, Metal Forming, Casting and Welding

• Lukšić, H., Rede, V.
  EFFECT OF LASER WELDING PARAMETERS ON THE WELDED JOINT IN BATTERY SYSTEMS OF ELECTRIC VEHICLES: A REVIEW
• Terek, V., Kovačević, L., Škorić, B., Drnovšek, A., Čekada, M., Bobić, Z., Zagoričnik, M., Terek, P.
  TRIBOLOGICAL TESTING OF MULTILAYER TiAlSiN COATING AT HIGH TEMPERATURES
• Panić, M., Smiljić, Đ., Movrin, D., Milutinović, M.
  ANALYSIS OF THE INFLUENCE OF RING DIMENSION RATIO ON FRICTION IN UPSETTING TESTS
• Timotijević, M., Erić Cekić, O., Janjatović, P., Rajnović, D.
  THE INFLUENCE OF OVERHEATING TEMPERATURE ON THE MICROSTRUCTURE OF HP40 ALLOY
• Skakun, P., Janjatović, P., Dramićanin, M., Rajnović, D.
  AN EXPERIMENTAL ASSESSMENT OF DEFORMATION IN METAL FORMING PROCESSES
• Trivkovic, M., Maksimovic, N., Pecanac, M., Stojisic, N., Dramičanin, M., Rajnovic, D., Balos, S.
  LASER SHOCK PEENING OF AISI 316L AUSTENITIC STAINLESS STEEL WITH VARIOUS CONFINEMENTS

Activity: Papers presentation

Day: September 25, 2024 (Wednesday)
Place: Conference room (Ground floor);
Science and Technology park, Fruškogorska 1, Novi Sad
Time: 14:45÷15:45

Section F: Mechanical Engineering and Environmental Protection

• Stanivuk, T., Dujmovic, M., Muslim, N., Dujmovic, M.
  ELECTRICAL MACHINES AND CONTROL SYSTEM FOR MANAGING BALLAST WATER OF SHIP
• Jovanovic, S., Ranisavljev, M., Milosevic, A., Ilic Micunovic, M., Vukelic, D., Agarski, B.
  LIFE CYCLE ASSESSMENT OF MACHINING PROCESSES: TURNING, MILLING, AND DRILLING
• Bošković, G., Stepanov, B., Bošković, M., Todorović, M., Čepić, Z.
  THE PROCEDURE FOR CALCULATING INPUT PARAMETERS IN THE PROCESS OF DETERMINING POTENTIAL RISK ZONES IN WAREHOUSES
• Ćurčić, S., Milovančević, M., Šarenac, S.
  APPLICATION OF MECHATRONIC STRUCTURES FOR THE PURPOSE OF ENVIRONMENTAL PROTECTION
• Krstanoski, M.
  STRATEGIES THAT CONTRIBUTE TO THE SUSTAINABLE DESIGN IN HURRICANE PRONE ENVIRONMENTS

Activity: Papers presentation

Day: September 25, 2024 (Wednesday)
Place: Meeting room 1 (Ground floor) ;
Science and Technology park, Fruškogorska 1, Novi Sad
Time: 14:45÷15:45

Section H: Additive Manufacturing Technologies

• Vasileska, E., Pandilov, Z., Gecevska, V., Tomov, M.
  EXPERIMENTAL DETERMINATION OF FLUENCE THRESHOLD AND MELT SIZE WITH D-SQUARED METHOD IN LASER POWDER BED FUSION
• Cerjak, A., Fink, A., Jurečič, J., Zaviršek, N., Žalec, U., Hozdić, E., Rogelj, A., Hozdić, E.
  EFFECT OF INFILL STRUCTURE SHAPE ON THE MECHANICAL PARAMETERS OF FDM 3D PRINTED PETG AND PETG+CF MATERIALS
• Ilić, K., Banjanin, B., Spasojević, S., Adamović, S., Dramićanin, M.
  EFFECT OF INFILL PATTERN ON THE TENSILE STRENGTH OF FDM 3D PRINTED PLA MATERIAL
• Tuteski, O., Kochov, A.
  OVERVIEW OF THE APPLICATION OF STEREOLITHOGRAPHY IN ADDITIVE MANUFACTURING OF INJECTION MOLDING TOOL INSERTS
• Trontelj, K., Slak, D., Primožič, J., Božič, A., Hozdić, E., Rogelj, A., Hozdić, E.
  IMPACT OF INFILL DENSITY ON THE MECHANICAL PROPERTIES OF FDM 3D PRINTED PETG AND PETG+CF MATERIALS
• Bogojević, N., Ćirić-Kostić, S., Sinđelić, V., Olmi, G., Croccolo, D.
  EFFECTS OF AGING AND SURFACE TREATMENTS ON THE FATIGUE STRENGTH OF STEEL COMPONENTS PRODUCED BY DMLS

Activity: Papers presentation

Day: September 25, 2024 (Wednesday)
Place: Meeting room 2 (1st floor) ;
Science and Technology park, Fruškogorska 1, Novi Sad
Time: 14:45÷15:45

Section E2: Materials, Metal Forming, Casting and Welding

• Vilotić, M., Dačević, N., Li, Y., Rynkovskaya, M., Alexandrov, S.
  THE PREDICTION OF A STRAIN STATE IN THE MULTISTAGE SEVERE PLASTIC DEFORMATION
• Petrovic, B., Pecanac, M., Hauck, A., Stojisic, N., Savkovic, B., Rajnovic, D., Balos, S.
  RESISTANCE ELEMENT WELDING OF AW6060 AND STRUCTURAL STEEL
• Kostić, N., Ranđelović, S., Perić, M.
  FEM SIMULATION AND VERIFICATION OF MECHANICAL PROPERTIES OF NONSYMMETRIC HOT FORGED PART
• Maksimovic, N., Hauck, A., Janjatovic, P., Pecanac, M., Savkovic, B., Rajnovic, D., Savic, V., Balos, S.
  INFLUENCE OF BASE METAL ROUGHNESS ON ADHESION-JOINED ALUMINIUM ALLOY AND STEEL
• Karpe, B., Kosec, B., Gojic, M., Ivanic, I., Nagode, A., Cigic, L., Bizjak, M.
  HEAT TRANSFER IN CHILLING WHEEL IN MELT-SPINNING PROCESS