Accepted papers MMA 2024

Rodić, D., Gostimirović, M., Sekulić, M., Savković, B., Aleksić, A., Kosanović, A.:

CIRCULARITY ANALYSIS OF LASER-DRILLED HOLES USING THE TAGUCHI METHOD

Madić, M., Trifunović, M., Janković, P.:

DEVELOPMENT AND ANALYSIS OF ANN MODEL FOR TOOL LIFE PREDICTION IN DRY TURNING OF S355JR UNALLOYED STEEL

Baralić, J., Nedić, B., Jovičić, A.:

MULTILAYER CUTTING WITH ABRASIVE WATER JET

Kovac, P., Taric, M., Rodic, D., Savkovic, B., Dudic, B., Jesic, D.:

NEURO-FUZZY SYSTEMS MODELING OF HARD STEEL SURFACE ROUGHNESS PARAMETERS

Vorkapic, N., Kokotovic, B., Zivanovic, S.:

COMPARATIVE ANALYSIS OF STATISTICAL FEATURES OF SIGNALS IN THE TIME DOMAIN IN INTERNAL TURNING OPERATIONS

Aleksić, A., Rodić, D., Gostimirović, M., Sekulić, M., Savković, B., Kosanović, A.:

PRELIMINARY INVESTIGATION OF THE IMPACT OF MQL ON SURFACE ROUGHNESS DURING THE TURNING ALUMINUM ALLOY 6082

Savkovic, B., Rodic, D., Sekulic, M., Kovac, P., Aleksic, A., Kosanovic, A.:

DEVELOPMENT OF A MEASUREMENT-ACQUISITION SYSTEM FOR MEASURING CUTTING FORCES AND TEMPERATURES USING VIRTUAL INSTRUMENTATION

Karabegović, I., Husak, E., Mahmić, M., Karabegović, E.:

CHINA IS THE LEADING COUNTRY IN THE WORLD DEVELOPING AND IMPLEMENTING ROBOT TECHNOLOGY IN ALL INDUSTRY BRANCHES

Marinković, D., Živković, A., Mlađenović, C., Knežev, M., Mejić, L., Savković, B.:

ANALYSIS OF THE INFLUENCE OF THE CUTTING REGIMES ON THE QUALITY OF THE MACHINING SURFACE IN TURNING PROCESS

Devic, A., Vidakovic, J., Zivkovic, N., Stepanovic, A.:

ADVANCEMENT OF THE INDUSTRIAL ROBOT PROGRAMMING LANGUAGE L-IRL USING AUGMENTED REALITY

Matin, I., Strbac, B., Ranisavljev, M., Hadzistevic, M., Vukelic, D.:

RESEARCH OF THE DEVIATION BETWEEN NUMERICAL SIMULATION AND EXPERIMENTS IN PLASTIC INJECTION MOLDING

Anišić, Z., Peić Tukuljac, E.:

DEVELOPMENT OF AN ELECTRONIC TOOL (ESAL – ELECTRONIC SHAFT ADJUSTER AND LOCKER) FOR DIRECT INJECTION PUMPS

Devedzic, G., Kocovic, V., Djordjevic, A., Jovanovic Pesic, Z., Dzunic, D., Vukelic, D., Petrovic Savic, S.:

RECONSTRUCTION AND OPTIMIZATION OF COMPLEX GEOMETRIC PARTS THROUGH REVERSE ENGINEERING

Živković, N., Pavlović, D., Ponjavić, M., Krošnjar, A., Stepanović, A.:

DESIGN OF COOLING SYSTEM FOR TWO POWER TRANSISTOR MODULES

Šulc, J., Reljić, V., Dakić, N., Jurošević, V.:

INTEGRATION OF ONE PNEUMATIC SOLUTION WITH A CNC DEVICE FOR THE REALIZATION OF THE PERFORATION PROCESS

Budimir Buda, A., Tabaković, S., Zeljković, M., Živanović, S., Dimić, Z.:

STRAIGHTNESS ANALYSIS OF MACHINE TOOL WITH NON-LINEAR KINEMATICS

Tabaković, S., Zeljković, M., Živanović, S.:

METHODS OF MONITORING AND APPLYING ENERGY BALANCE PARAMETERS IN THE EXPLOITATION OF MODERN MACHINE TOOLS

Jokić, A., Jevtić, Đ., Brenjo, K., Petrović, M., Miljković, Z.:

DEEP LEARNING-BASED VISUAL SERVOING ALGORITHM FOR WHEELED MOBILE ROBOT CONTROL

Knežev, M., Mlađenović, C., Marinković, D., Calin, A., Živković, A.:

FINITE ELEMENT ANALYSIS OF TURNING CUTTING TOOL

Nešovanović, Lj., Živanović, S., Konjević, P.:

INACCURACY ANALYSIS OF CHEBYSHEV’S MECHANISM

Suvajac, Z., Nedeljkovic, D., Jakovljevic, Z.:

OBJECT POSITION AND ORIENTATION DETECTION IN ASSEMBLY TASKS – AN APPROACH BASED ON YOLOV8 ALGORITHM

Maletić J., Vorkapic, N., Živanović S.:

PROGRAMMING AND VERIFICATION OF THE MACHINING PROGRAM FOR A TEST WORKPIECE FOR A MACHINE WITH A HORIZONTAL ROTARY AXIS

Tanasić, Z., Vuković, M., Panić, M., Janjić, G.:

IMPROVEMENT ASSEMBLY PROCESS USING LEAN MANUFACTURING METHODS AND TOOLS

Milosevic, A., Kocovic, V., Santosi, Z., Sokac, M., Simunovic, G., Tadic, B., Vukelic, D.:

MODELLING THE BORING PROCESS ON THE BASIS OF CENTRIFUGAL FORCE USING A SPECIALLY DESIGNED TOOL HOLDER

Vidakovic I., Simunovic, K., Pacarek, G., Barac, Z., Rozing, G.:

APPLICATION OF NiCrBSi AND NiCrBSi-WC COATINGS AS WEAR PROTECTION FOR PARTS OF AGRICULTURAL TECHNIQUE

Jotic, G., Strbac, B., Sokac, M., Tanasic, Z., Runje, B., Acko, B., Hadzistevic, M.:

OPTIMIZATION OF THE MEASUREMENT PROCESS USING A 3D LASER SCANNER

Ognjenčić, K., Šimunović, G.:

MEASUREMENT TECHNIQUES FOR REDUCING WATER LOSS IN SUPPLY SYSTEMS: FLOW, PRESSURE, AND NOISE ASSESSMENT

Bozic, D., Runje, B., Razumic, A., Lisjak, D., Strbac, B.:

RISK ASSESSMENT FOR NON-CENTERED MODELS IN METROLOGY

Rodinger, T., Lukšić, H., Ćorić, D., Rede, V.:

THE INFLUENCE OF ARTIFICIAL AGING PARAMETERS ON THE ABRASIVE WEAR RESISTANCE OF AN Al-Zn-Mg ALLOY

Kasalica, V., Zivanovic, S., Stojadinovic, S.:

SIMULATION OF MEASUREMENT ON CMM BY IMPLEMENTING A DIGITAL TWIN MODEL

Santosi, Z., Sokac, M., Milosevic, A., Ivanov, V., Vukelic, D.:

3D RECONSTRUCTION OF MACHINE VISE BY APPLICATION OF PHOTOGRAMMETRY AND REVERSE ENGINEERING

Bozic, D., Runje, B., Razumic, A., Lisjak, D., Strbac, B.:

RISK ASSESSMENT FOR LINEAR REGRESSION MODELS IN METROLOGY: HYPOTHETICAL CASES

Makovec, I.:

GENERATIVE ARTIFICIAL INTELLIGENCE IN COLABORATIVE MANUFACTURING

Bozic, D., Lukic, D., Milosevic, M., Spaic, O., Marinovic, B., Radovanovic, M.:

OPTIMIZATION OF MACHINING PROCESS PLANNING – CASE STUDY OF A PRISMATIC PART

Trstenjak, M., Opetuk, T., Cajner, H., Đukić, G., Mustapić, M.:

METHODS AND TOOLS FOR ERGONOMIC ASSESSMENT IN MODERN INDUSTRIAL ENVIRONMENT

Vukelic, Z., Cajner, H., Trstenjak, M.:

THE ASPECT OF TECHNOLOGICAL HUMANISM IN THE IMPLEMENTATION OF ROBOTIC SYSTEMS (RS) AND ARTIFICIAL INTELLIGENCE (AI) IN INDUSTRY 5.0

Štrbac, G., Štrbac, B., Milošević, M., Ranisavljev, M., Hadžistević, M.:

IMPORTANCE OF 3D CAD SEARCH ENGINES IN GEAR MAINTENANCE

Vukman, J., Milošević, M., Borojević, S., Ungureanu. N., Božić, D., Lukić, D.:

OPTIMIZATION OF THE MACHINING PARAMETERS OF ALUMINUM PARTS AS A FUNCTION OF THE PERPENDICULARITY DEVIATION OF THIN-WALLED SURFACES

Ćurčić, S., Milovančević, M., Savković, B.:

IMPROVING THE SAFETY OF THE TRANSPORT ZONE USING THE MAKIGAMI METHODOLOGY

Lukšić, H., Rede, V.:

EFFECT OF LASER WELDING PARAMETERS ON THE WELDED JOINT IN BATTERY SYSTEMS OF ELECTRIC VEHICLES: A REVIEW

Terek, V., Kovačević, L., Škorić, B., Drnovšek, A., Čekada, M., Bobić, Z., Zagoričnik, M., Terek, P.:

TRIBOLOGICAL TESTING OF MULTILAYER TiAlSiN COATING AT HIGH TEMPERATURES

Panić, M., Smiljić, Đ., Movrin, D., Milutinović, M.:

ANALYSIS OF THE INFLUENCE OF RING DIMENSION RATIO ON FRICTION IN UPSETTING TESTS

Timotijević, M., Erić Cekić O., Janjatović, P., Rajnović, D.:

THE INFLUENCE OF OVERHEATING TEMPERATURE ON THE MICROSTRUCTURE OF HP40 ALLOY

Skakun, P., Janjatović, P., Dramićanin, M., Rajnović, D.:

AN EXPERIMENTAL ASSESMENT OF DEFORMATION IN METAL FORMING PROCESSES

Trivkovic, M., Maksimovic, N., Pecanac, M., Stojisic, N., Dramicanin, M., Rajnovic D., Balos, S.:

LASER SHOCK PEENING OF AISI 316L AUSTENITIC STAINLESS STEEL WITH VARIOUS CONFINEMENTS

Vilotić, M., Dačević, N., Li, Y., Rynkovskaya, M., Alexandrov, S.:

THE PREDICTION OF A STRAIN STATE IN THE MULTISTAGE SEVERE PLASTIC DEFORMATION

Petrovic, B., Pecanac, M., Hauck, A., Stojisic, N., Savkovic, B., Rajnovic, D., Balos S.:

RESISTANCE ELEMENT WELDING OF AW6060 AND STRUCTURAL STEEL

Kostić, N., Ranđelović, S., Perić, M.:

FEM SIMULATION AND VERIFICATION OF MECHANICAL PROPERTIES OF NONSYMMETRIC HOT FORGED PART

Maksimovic, N., Hauck, A., Janjatovic, P., Pecanac, M., Savkovic, B., Rajnovic, D., Savic, V., Balos, S.:

INFLUENCE OF BASE METAL ROUGHNESS ON ADHESION-JOINED ALUMINIUM ALLOY AND STEEL

Karpe, B., Kosec, B., Gojic, M., Ivanic, I., Nagode, A., Cigic, L., Bizjak, M.:

HEAT TRANSFER IN CHILLING WHEEL IN MELT-SPINNING PROCESS

Stanivuk, T., Dujmovic, M., Muslim, N., Dujmovic, M.:

ELECTRICAL MACHINES AND CONTROLL SYSTEM FOR MANAGING BALLAST WATER OF SHIP

Jovanovic, S., Ranisavljev, M., Milosevic, A., Ilic Micunovic, M., Vukelic, D., Agarski, B.:

LIFE CYCLE ASSESSMENT OF MACHINING PROCESSES: TURNING, MILLING, AND DRILLING

Bošković, G., Stepanov, B., Bošković. M., Todorović, M., Čepić, Z.:

THE PROCEDURE FOR CALCULATING INPUT PARAMETERS IN THE PROCESS OF DETERMINING POTENTIAL RISK ZONES IN WAREHOUSES

Ćurčić, S., Milovančević, M., Šarenac, S.:

APPLICATION OF MECHATRONIC STRUCTURES FOR THE PURPOSE OF ENVIRONMENTAL PROTECTION

Krstanoski, M.:

STRATEGIES THAT CONTRIBUTE TO THE SUSTAINABLE DESIGN IN HURRICANE PRONE ENVIRONMENTS

Vasileska E., Pandilov Z., Gecevska V., Tomov M.:

EXPERIMENTAL DETERMINATION OF FLUENCE THRESHOLD AND MELT SIZE WITH D-SQUARED METHOD IN LASER POWDER BED FUSION

Cerjak, A., Fink, A., Jurečič, J., Zaviršek, N., Žalec, U., Hozdić, E., Rogelj, A., Hozdić, E.:

EFFECT OF INFILL STRUCTURE SHAPE ON THE MECHANICAL PARAMETERS OF FDM 3D PRINTED PETG AND PETG+CF MATERIALS

Ilić, K., Banjanin, B., Spasojević, S., Adamović, S., Dramićanin, M.:

EFFECT OF INFILL PATTERN ON THE TENSILE STRENGTH OF FDM 3D PRINTED PLA MATERIAL

Tuteski, O., Kochov, A.:

OVERVIEW OF THE APPLICATION OF STEREOLITHOGRAPHY IN ADDITIVE MANUFACTURING OF INJECTION MOLDING TOOL INSERTS

Trontelj, K., Slak, D., Primožič, J., Božič, A., Hozdić, E., Rogelj, A., Hozdić, E.:

IMPACT OF INFILL DENSITY ON THE MECHANICAL PROPERTIES OF FDM 3D PRINTED PETG AND PETG+CF MATERIALS

Bogojević, N., Ćirić-Kostić, S., Sinđelić, V., Ol mi, G., Croccolo, D.:

EFFECTS OF AGING AND SURFACE TREATMENTS ON THE FATIGUE STRENGTH OF STEEL COMPONENTS PRODUCED BY DMLS